A whiteboard sized comfortably for an enclosed meeting room can feel undersized the moment it is placed in an open-plan area, simply because there is more competing visual activity and greater viewing distance to account for. An enclosed room contains the sightlines within four walls, so a board only needs to work for the people actually sitting at the table. An open-plan space has no such boundary, which is why boards intended for open areas are usually specified larger than intuition alone would suggest. This difference is easy to underestimate until a board that worked perfectly in one setting turns out to feel undersized in the other.

In an open-plan layout, people often view a whiteboard from further away and at sharper angles than they would in a dedicated meeting room, whether walking past or working from a nearby desk. This makes text size and board height at least as important as overall width, since a board that is wide enough up close can still be hard to read from across an open floor. Sizing for an open area usually means accounting for the furthest realistic viewing point, not just the nearest one. This is one detail purely visual judgement tends to miss, since a board can look perfectly proportioned up close while still being too small from across an open floor.

At longer viewing distances, a SatinTones colour-matched panel can also read differently to a plain white one, so it is worth checking a physical sample from the actual distance people will typically view it from in that specific space.

Inside an enclosed room, the constraint is usually the room itself rather than viewing distance, since everyone present is within a few metres of the board regardless of its size. Here, the limiting factor tends to be how much wall space is actually free once a screen, credenza or window is accounted for, rather than how far people need to read from. A board that fills the available wall without overwhelming the room usually works better than the largest board that will physically fit. This constraint rarely changes once a room’s layout is set, which is why it deserves attention before a board is ordered rather than after.

The board itself carries the same lifetime warranty on writing and erasing in either setting, so durability is not a factor that should influence the size decision either way.

Open-plan areas often need to balance a whiteboard against acoustic considerations, since a hard, reflective surface behaves differently in an open space with no walls to absorb sound than it does inside a closed room. Enclosed rooms rarely have this concern, but they introduce a different one: a board visible through a glass partition may need positioning that keeps sensitive content out of view from the wider floor. Both factors affect where the board goes as much as how big it should be, and either can shift the final size decision once positioning constraints are factored in.

A useful starting point is to measure the realistic viewing distance for the space, then check that a proposed board’s text and diagram scale would still be legible from that distance under normal office lighting. For open-plan areas, erring slightly larger than feels necessary usually pays off, since retrofitting a bigger board later is more disruptive than sizing generously from the outset. For enclosed rooms, matching the board to the available wall space typically gives a better result than chasing maximum size. Combining this practical check with a simple stand-at-the-furthest-point test gives a reasonably confident final size before involving a supplier: stand at the furthest realistic viewing point and confirm the proposed size still reads clearly from there, since this costs nothing and can prevent a genuinely disappointing result once the board is installed.

Whichever size is settled on, confirming the wall can support Chameleon’s TÜV-certified magnetic mounting system is worth doing before finalising the order, since this applies equally in open-plan and enclosed settings.

The furniture layout around a large whiteboard affects sizing as much as the room’s raw dimensions do, since a board partially obscured by tall seating or a poorly placed screen effectively loses usable height regardless of its actual size on the wall. Reviewing the intended furniture plan alongside the board size, rather than sizing the board in isolation from everything else going into the room, avoids ending up with a board that is nominally large enough but practically undersized once furniture is in place. Panels are available up to a standard maximum of 1180 x 2980mm, which is a useful reference point when checking a proposed size against both the room’s furniture plan and its available wall space.

The underlying construction, an FSC-certified MDF core with a Cradle to Cradle Bronze certified enamel layer, stays consistent across every size Chameleon offers, so scaling up to fit a larger room does not mean compromising on material.

Learn how Chameleon large whiteboards can be specified for your project.