The same basic rules apply to the surface of every Chameleon whiteboard: clean it with a proper whiteboard cleaning spray before first use, only wipe off ink once the board is completely dry, and use a clean microfibre cloth without fabric softener. For the full explanation, including what to do about a stubborn mark left by the wrong type of marker, read our guide on how to clean and maintain a ceramic steel whiteboard. These rules apply equally to the Oak Mobile and the Mobile.

Wheels on a mobile whiteboard roll across the same floors as office chairs and foot traffic, and pick up dust, hair and loose carpet fibres around the axle as a result. Check the wheels periodically for buildup, especially if the board noticeably starts rolling with more resistance than before. Remove trapped debris with a dry cloth or a small brush, and avoid applying water or cleaning spray directly to the wheels, since moisture in the wheel bearing can affect smooth rolling over time. A stiff-bristled brush works well for debris caught between the spokes of a wheel, reaching into the gap without needing to remove the wheel itself.

The Oak Mobile stands on 75 mm black castors, two of which lock in place. Check regularly that the locking mechanism still engages properly: a castor that no longer locks fully can let the board roll unexpectedly if someone leans against it. Test this by engaging the brake and gently pushing the board. If the lock no longer holds firmly, get in touch so a replacement castor can be arranged.

The Mobile rolls on transparent skate wheels designed to move smoothly in one direction. Because these wheels are deliberately non-swivelling, keeping them free of debris matters for smooth forward and backward movement. If the board starts rolling less smoothly, check first for threads or debris wrapped around the axle before assuming something mechanical has gone wrong. In most cases, a quick clean resolves the issue.

Beyond the writing surface and wheels, the frame itself benefits from a little attention over time. The Oak Mobile’s solid oak frame is lacquered, which protects the wood from everyday knocks and moisture, but like any wooden furniture it’s worth keeping away from prolonged direct sunlight or sitting water, both of which can affect the finish over several years. A light dusting with a dry or slightly damp cloth is usually all that’s needed, and any deeper concerns about the wood finish are worth raising directly rather than treating with household wood products not designed for a lacquered surface. The Mobile’s frame requires even less attention, since its construction is built around the writing surface itself rather than a separate decorative finish.

Both models are designed to be gentle on flooring, but on delicate surfaces like parquet or natural stone, it’s worth avoiding a fixed, repeated route, so the same spot isn’t rolled over constantly. On rugs, the wheels roll slightly heavier, which is normal and not a cause for concern as long as the wheels stay free of trapped carpet fibres. If in doubt about the floor, move the board occasionally rather than leaving it in exactly the same spot for weeks at a time.

A few habits do more harm than good. Avoid abrasive cloths or paper towels on the writing surface, since these can create fine scratches over time even on a scratch-resistant ceramic steel finish, and never use harsh solvents or ammonia-based cleaners, which can dull the surface’s gloss or matte finish faster than normal use would. On the wheels, resist the temptation to spray lubricant onto a sticking castor as a quick fix, since many general-purpose lubricants attract more dust and debris than they solve, making the problem worse within a few weeks rather than better. If a wheel genuinely needs servicing beyond a simple clean, it’s better to get in touch for advice than to experiment with household products.

Accessories that come with a mobile whiteboard, such as marker trays, pen holders and leather pulling straps, benefit from occasional attention alongside the board itself. A leather strap, like the one used on the Mobile, stays supple longer if it’s kept dry and out of direct heat, in the same way any leather item would. Marker trays and holders are worth emptying and wiping out periodically, since dried ink residue and dust tend to accumulate in these smaller spaces faster than on the board’s main surface, simply because they’re easy to overlook during a routine clean.

Maintenance for a mobile whiteboard doesn’t need to be complicated: clean the surface whenever it needs it, check the wheels roughly once a month for trapped debris, and occasionally test that the Oak Mobile’s locking castors still engage properly. Building this short check into a facilities team’s or caretaker’s existing routine keeps a mobile whiteboard rolling and writing as smoothly years into its life as it did on the day it arrived. For organisations with several boards, assigning this check to a specific recurring task, rather than leaving it to whoever happens to notice a problem, makes it far more likely the routine actually gets followed over time.

How often a board needs attention depends heavily on how intensively it’s used. An office board moved occasionally between a handful of meeting rooms might only need a wheel check every couple of months, while a board used daily by different classes in a school corridor will accumulate dust and debris far faster and benefits from a more frequent check, closer to every few weeks. Schools also tend to have multiple boards in circulation at once, which makes it worth keeping a simple shared log of when each board was last checked, so maintenance gets spread evenly across every board rather than concentrated on whichever one happens to be noticed first. A simple shared log, even something as basic as a sticky note on the back of each board noting the last check date, is often enough to keep this consistent across a fleet of several boards without needing a more formal system.

A few symptoms point to specific, usually simple fixes. A board that resists erasing cleanly, leaving faint ghosting behind, usually means ink has been left on the surface too long before wiping, rather than a problem with the surface itself; cleaning promptly after use largely prevents this. A board that pulls slightly to one side while rolling, rather than travelling in a straight line, often has debris caught around one wheel rather than a wheel that needs replacing outright. A board that no longer locks securely in place, on the Oak Mobile specifically, should be checked and potentially have its castor replaced, since a board that won’t stay put where it’s parked becomes a safety concern over time rather than just an inconvenience.

Most mobile whiteboard issues are solved with routine cleaning, but a few signs point to needing a replacement part rather than more maintenance. A writing surface that no longer erases cleanly even immediately after use, rather than just after ink has been left too long, may indicate surface wear beyond what cleaning can fix. A castor that continues to stick or fails to lock after cleaning and inspection likely needs replacing outright rather than further troubleshooting. Recognising the difference between a maintenance issue and a parts issue early avoids spending time repeatedly cleaning something that actually needs a replacement component. It’s generally far cheaper and faster to replace a single worn castor than to replace the whole board, so treating a parts issue as exactly that, rather than writing off the entire unit, is usually the more practical response.

It’s worth thinking about maintenance requirements before a board is even ordered, not just after it arrives. A board destined for a high-traffic school corridor, used by several different classes a day, will need more frequent wheel checks than one sitting in a quiet office breakout corner, and knowing this in advance helps set realistic expectations for whoever ends up responsible for the board’s upkeep. For organisations purchasing several boards at once, it’s worth deciding at that stage who owns the maintenance routine, facilities, a caretaker, or an individual team, so the responsibility doesn’t quietly fall through the cracks once the initial excitement of a new board has worn off.

For organisations with several mobile whiteboards, consistency in how each one is maintained matters almost as much as the maintenance itself. If one board is cleaned weekly and another is only checked when someone notices a problem, the two will age very differently even though they started out identical. Setting a shared standard, the same cleaning products, the same wheel-check interval, and the same person or team responsible, keeps every board in a fleet performing similarly over time, rather than ending up with a mix of well-maintained and neglected units within the same building.

None of this maintenance is complicated or time-consuming on its own, but it only works if it actually happens on a regular basis rather than being left until something visibly goes wrong. A short, predictable routine, cleaning the surface as needed and checking the wheels monthly, keeps a mobile whiteboard performing the way it did on day one for years rather than months. Want to know more about the models themselves? Browse Chameleon’s full range of mobile whiteboards to see the Oak Mobile and Mobile in detail.